Leaks are more common in older properties, but newer properties can have leaks as well. Poor workmanship, settling, and corrosion can cause sudden, catastrophic pipe damage. If left unrepaired, the leaking water can damage your property to the point of rendering it unusable.
When To Call For Leak Detection
The first step in repairing a leak is to find out where the leak originated. Since water travels in specific but unpredictable patterns, finding the exact origin of the leak can be difficult. Expert plumbers are experienced with inspecting complex water trails and formulating effective leak repair plans based on the source of the leak..
Surveying the property to gauge where a leak could have surfaced is another common technique used by leak repair experts. The ground is softer and less absorptive near the leak site; this gives the leak repair expert an idea of where to start the leak repair process. If an outside pipe is the suspected problem, contractors will dig in the area where the ground is losing its density and firmness.
Leak repair experts must tread lightly to avoid sinking heavy construction equipment into the soft earth and causing more damage.
Leak detection and repair is a delicate discovery process, and contractors and plumbers use technology to facilitate the discovery and repair of leaks. Specialized equipment can uncover areas that contain a higher moisture level than surrounding areas. Remote cameras can be rigged to fit into the smallest pipes to determine if there are any areas of concern within the piping system.
Property owners must work with the applicable local governments to determine if outside pipe and leak repairs are the responsibility of the property owner or the local public works department.
There are many retail complexes and various housing developments that include both single family homes, condominiums, and apartment buildings, and that means a large burden for aging underground pipes.
As developments in and near Florida continue to emerge the potential for additional leaks and ruptures of citywide plumbing systems also rises.
It is important to ensure that the correct responsible party pays for the leak detection and repair services to prevent additional litigation.
One strong indicator of a leak is the water meter. When the water meter is opened in a residential building, the indicator – often shaped as a triangle or a circle – is exposed. If the flow indicator is spinning, this indicates a severe leak that requires the leak detection expert to shut down the main shut-off valve. When shutting down the shut-off valve stops the indicator from spinning, the leak is internal. When shutting down the shut-off valve does not stop the indicator from spinning, the leak is outside of the building – often underground – and the expert must use specialized equipment to locate the leak.
Once the expert discovers the source of the leak, the expert solves the issue by replacing the pipe or covering the leakage area, depending on the location and severity of the leak.